HomeContact
 

Admin
Password
Address
OLSR
Wireless
LAN
WAN
PPPoE
Publish
Software
Firmware
Restart
Back

Admin: Wireless

WLAN Protocol:
WLAN-IP Address:
WLAN Netmask:
WLAN default route:
 
WLAN Mode:
ESSID:
Channel:
Card Type: 802.11a  802.11b/g
RX Antenna: Auto  Antenna A  Antenna B
TX Antenna: Auto  Antenna A  Antenna B
TX Power:
Radio Mode:
Broadcast (E)SSID: Enable   Disable
Basic Rate:
Transmission Rate:
CTS Protection Mode:
Frame Burst:
Beacon Interval:
DTIM Interval:
Fragmentation Threshold:
RTS Threshold:
MTU Value:
 
   

Tip: For most devices, the setting Antenna A activates the left antenna (seen from the front).

The changed settings are committed. The settings are active after the next Restart.
No settings are changed.
Changed: 13.9.2005
 Top of page