Admin: LAN

LAN Protocol:
LAN IP:
LAN Netmask:
LAN Default Route:
Static Routes:
Disable NAT:
Disable Firewall:
Note: The firewall function between WLAN and LAN is not active, because the LAN IP address ($lan_ipaddr) is part of the WLAN network ($wifi_ipaddr/$wifi_netmask).
DHCP Start IP:
DHCP Number of Users:	(DHCP off with "0")
DHCP Lease Time:	seconds

Tip: These settings influence the configuration, which is sent to wired clients via DHCP. To ensure a convenient network access, you should enter the Host Name and the internal Domain (-> WAN). Consejo: Estos parámetros influencian la configuración que será enviada a los clientes por cable a través de DHCP. Para asegurar un acceso conveniente a la red, tendrías que insertar el Nombre del Host y el Dominio (-> WAN).

The changed settings are committed. The settings are active after the next Restart.

No settings are changed.

Changed: 12.2.2006

Top of page