|
|
Configuring LAN Groups with static IP address must be done in a way that
the range of assignable IP address on each of the LAN groups should not
overlap with other lan groups. A rule of thumb would be that each lan group should be
on its own network.
For example, say you have 3 lan groups each being
setup with static IP addressing. Below is a sample configuration data,
LanGroup #1
IP Address 192.168.1.1
NetMask 255.255.255.0
LanGroup #2
IP Address 192.168.2.1
NetMask 255.255.255.0
LanGroup #3
IP Address 192.168.3.1
NetMask 255.255.255.0
The example shows that each lan group is on its own network and that
there is no everlap in assignable IP address besed on netmask. |
|
|
