Grandstream Device Configuration

Grandstream Device Configuration

STATUS

BASIC SETTINGS

ADVANCED SETTINGS

PROFILE 1

PROFILE 2

FXS PORTS

Admin Password:

(purposely not displayed for security protection)

Layer 3 QoS:

(Diff-Serv or Precedence value)

Layer 2 QoS:

802.1Q/VLAN Tag 802.1p priority value (0-7)
802.1p priority value (NATed traffic) (0-7)

STUN server is :

(URI or IP:port)

Keep-alive Interval:

(in seconds, default 20 seconds)

Use STUN to detect network connectivity:

No
Yes, total STUN response misses to restart DHCP client(mininum=3)

Firmware Upgrade and Provisioning:

Upgrade Via TFTP HTTP HTTPS
Firmware Server Path:
Config Server Path:

XML Config File Password:
HTTP/HTTPS User Name:
HTTP/HTTPS Password:

Firmware File Prefix: Firmware File Postfix:
Config File Prefix: Config File Postfix:

Allow DHCP Option 66 to override server:
No Yes

Automatic Upgrade:
No Yes, every minutes(60-5256000).
Yes, daily at hour (0-23). Yes, weekly on day (0-6).

Always Check for New Firmware at Boot up
Check New Firmware only when F/W pre/suffix changes
Always Skip the Firmware Check

Authenticate Conf File:

No Yes (cfg file would be authenticated before acceptance if set to Yes)

Firmware Key:

(in Hexadecimal Representation)

SSL Certificate:

SSL Private Key:

SSL Private Key Password:

ACS URL:

ACS Username:

ACS Password:

Periodic Inform Enable:

No Yes

Periodic Inform Interval:

Conncetion Request Username:

Connection Request Password:

System Ring Cadence:

Call Progress Tones:

Dial Tone:
Ringback Tone:
Busy Tone:
Reorder Tone:
Confirmation Tone:
Call Waiting Tone:

Syntax: f1=val[,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]]];
(Frequencies are in Hz and cadence on and off are in ms)

Lock keypad update:

No Yes (configuration update via keypad is disabled if set to Yes)

Disable voice prompt:

No Yes (voice prompt is disabled if set to Yes)

Disable Direct IP Call:

No Yes (direct IP call is disabled if set to Yes)

Life line mode:

Auto Always disconnected Always connected

Failover to FXO Gateway:

Disable Enable

FXO Gateway:

(URI or IP address)

NTP Server:

(URI or IP address)

Syslog Server:

Syslog Level:

Primary RADIUS Server:

Primary RADIUS Auth Port:

(default 1812)

Primary RADIUS Acct Port:

(default 1813)

Primary RADIUS Server Secret:

Secondary RADIUS Server:

Secondary RADIUS Auth Port:

(default 1812)

Secondary RADIUS Acct Port:

(default 1813)

Secondary RADIUS Server Secret:

RADIUS Timeout:

(default 2)

RADIUS Retry:

(default 3)

Download Device Configuration: