Firmware version: 
DD-WRT #22 (talismen)   

Wireless

Wireless-G Broadband Router   DD-WRT
 
Setup Wireless Security Access Restrictions

Applications
& Gaming
    

Administration    

Status    

Basic Settings 

|

WRT-radauth 

|

Wireless Security 

|

MAC Filter  

|

Advanced Settings 

|

WDS

Advanced Wireless

               
      Authentication Type:   (Default: Auto)    
      Basic Rate:   (Default: Default)    
      Transmission Rate:   (Default: Auto)    
      CTS Protection Mode:   (Default: Disable)    
      Frame Burst:   (Default: Disable)    
      Beacon Interval:   (Default: 100ms, Range: 1 - 65535)    
      DTIM Interval:   (Default: 1, Range: 1 - 255)    
      Fragmentation Threshold:   (Default: 2346, Range: 256 - 2346)    
      RTS Threshold:   (Default: 2347, Range: 0 - 2347)    
      AP Isolation:   (Default: Off)    
      Preamble   (Default: Long)    
      TX Antenna:   (Default: Auto)    
      RX Antenna:   (Default: Auto)    
      Xmit Power:   (Default: 28, Range: 0 - 251 mw)    
      Afterburner:   (Default: Off)    
      Wireless GUI Access   (Default: On)    
 
Authentication Type : You may choose from Auto or Shared Key. Shared key authentication is more secure, but all devices on your network must also support Shared Key authentication.
More...